东北捣固焦炉适应性探讨

燃料与化工 ›› 2010, Vol. 41 ›› Issue (5): 10-12.

东北捣固焦炉适应性探讨

李法柱1，孙英哲1，白守明2

1.抚顺新钢铁有限责任公司，抚顺 113001；2.中冶焦耐工程技术有限公司，鞍山 114002

出版日期:2010-09-23

Discussion on adaptability of stamp-charging coke oven in northeast area

Li Fazhu1，Sun Yingzhe1，Bai Shouming2

1. Fushun New Steel and Iron Co., Ltd, Fushun 113001, China；
2. ACRE Coking & Refractory Engineering Consulting Corp., MCC, Anshan 114002, China

Online:2010-09-23

摘要/Abstract

摘要：

从东北地区捣固焦炉的分布情况、炼焦煤资源特点、气候等方面详细分析了东北地区发展捣固焦炉的前景及优势。辽宁地区具有充分利用东北和华北炼焦煤资源的特点及区域位置优势，更适合发展捣固焦炉尤其是炭化室高5.5m及以上的大型捣固焦炉。捣固炼焦可多配入高挥发分煤，产生大量的煤气，对缓解辽宁地区煤气供应紧张问题具有重要意义。

Abstract:

The foreground and superiority for developing stamp-charging coke oven in the northeast area are analyzed in detail from the aspects of stamp-charging coke oven distribution, the resources features of the coal for coke-making and climatic conditions and so on in the area. Liaoning area has the priority of the full utilization features of coal resource for coke-making in northeast area and north China and location superiority and is more adaptable for developing stamp-charging coke oven, especially the large-scale stamp-charging coke oven. The coal with high volatile matter can be added in the coal for stamp-charging coke-making to generate large amount of gas to moderate the problem of short supply of gas in Liaoning area and this has an important significance.

中图分类号:

TQ522

李法柱1，孙英哲1，白守明2. 东北捣固焦炉适应性探讨[J]. 燃料与化工, 2010, 41(5): 10-12.

Li Fazhu1，Sun Yingzhe1，Bai Shouming2. Discussion on adaptability of stamp-charging coke oven in northeast area[J]. FUEL & CHEMICAL PROCESSES, 2010, 41(5): 10-12.

[1]	来威吴秋阳巩力强延井超. 炼焦重复试验误差超标的研究[J]. 燃料与化工, 2018, 49(4): 21-23.
[2]	刘占博赵恒波周鹏党平彭磊. 7m焦炉边火道辅助加热系统的改进[J]. 燃料与化工, 2018, 49(4): 24-26.
[3]	马晓龙1 马殿宇2 张琦1 李超1 李荣娇1. 一种制备各向同性焦的方法[J]. 燃料与化工, 2018, 49(4): 46-48.
[4]	桂敏何一兵刘小敏张志刚. 蒽油采出泵密封的研究与改进[J]. 燃料与化工, 2018, 49(3): 60-61.
[5]	岳进. 焦炉长结焦时间下炉温的控制与管理[J]. 燃料与化工, 2017, 48(5): 43-44.
[6]	江鑫付利俊. 蒸馏法检测轻苯终点主要误差来源及管控[J]. 燃料与化工, 2017, 48(4): 34-36.
[7]	刘冬杰1 杨峰2 穆春丰2 张春华3. 9-芴甲醇的合成研究[J]. 燃料与化工, 2017, 48(3): 38-41.
[8]	于洪涛张亦弛迟宇. 浅析油库储罐的泡沫灭火及水冷却系统[J]. 燃料与化工, 2017, 48(3): 62-54.
[9]	李申明付宇张阁蔡润珂. 带式输送机节能降耗研究[J]. 燃料与化工, 2017, 48(2): 19-20.
[10]	来威杨洪海吴秋阳徐庆阳韩剑. PDCA循环在焦化生产中的应用[J]. 燃料与化工, 2017, 48(1): 30-31.
[11]	钟继生. 洗苯塔阻力的探讨[J]. 燃料与化工, 2016, 47(6): 52-54.
[12]	赖云杰. U型管导烟技术在捣固焦炉的应用[J]. 燃料与化工, 2016, 47(5): 28-30.
[13]	尹文亮赵国海史争光姚怀伟郝晓洁. 提高粗苯收率的生产实践[J]. 燃料与化工, 2016, 47(5): 43-44.
[14]	牟彪孔祥勇. 捣固余煤配入比例对焦炭质量的影响[J]. 燃料与化工, 2016, 47(4): 14-15.
[15]	罗伟1 谷文彬1 王瑞1 杨建华2. 干熄焦的经济运行分析[J]. 燃料与化工, 2016, 47(4): 19-20.