大型焦炉的节能减排技术分析

燃料与化工 ›› 2010, Vol. 41 ›› Issue (5): 7-10.

大型焦炉的节能减排技术分析

陈海文，邵丰，张长青

中冶焦耐工程技术有限公司，鞍山 114002

出版日期:2010-09-23

Technical analysis on energy saving and discharge reduction of high capacity coke oven

Chen Haiwen，Shao Feng，Zhang Changqing

ACRE Coking & Refractory Engineering Consulting Corp., MCC, Anshan 114002, China

Online:2010-09-23

摘要/Abstract

摘要：

分析了大容积顶装焦炉与捣固焦炉的节能减排技术。7m焦炉装煤除尘采用单集气管高压氨水喷射与除尘装煤车及除尘地面站相配合的处理方式，排放气体达到环保要求。7.63m焦炉采用PROven系统与装煤车配合，效果与喷洒高压氨水＋地面除尘站系统相当。6.25m捣固焦炉采用高压氨水喷射装置、双U形管导烟车、机侧炉门密封装置及炉头烟气抽吸装置，可最大限度地控制烟尘气外逸。

Abstract:

The energy saving and discharge reduction technology between high-capacity coke oven and stamp-charging coke oven was analyzed. After the disposal mode of high pressure ammonia liquor injection in single collecting main and the combination of de-dusting charging car and stationary bag-house unit for 7m high coke oven was adopted, the gas discharged can meet the requirement of environmental protection. The PROven system is used for 7.63m high coke oven and in combination with the charging car, its effect is equivalent to high pressure ammonia liquor injection + stationary bag-house unit. If 6.25m stamp-charging coke oven adopts high pressure ammonia liquor injection device, double U shape emission transfer car, oven door sealing device and oven end emission suction device on pusher side, the emission escaped can be controlled to maximum extent.

中图分类号:

TQ522.15

陈海文，邵丰，张长青. 大型焦炉的节能减排技术分析[J]. 燃料与化工, 2010, 41(5): 7-10.

Chen Haiwen，Shao Feng，Zhang Changqing. Technical analysis on energy saving and discharge reduction of high capacity coke oven[J]. FUEL & CHEMICAL PROCESSES, 2010, 41(5): 7-10.

[1]	韩龙孙衍烁杨俊峰. 影响炉墙稳定性的因素分析及改善措施[J]. 燃料与化工, 2019, 50(4): 22-25.
[2]	彭宁宁侯耀华. 浅谈焦炉砌体在完全凉炉后的修复[J]. 燃料与化工, 2019, 50(2): 35-36.
[3]	彭宁宁侯耀华. 浅谈焦炉砌体在完全凉炉后的修复[J]. 燃料与化工, 2019, 50(2): 35-36.
[4]	彭宁宁. 焦炉完全凉炉后再次烘炉的特点[J]. 燃料与化工, 2019, 50(1): 21-22.
[5]	吴木之1 严铁军2. 武钢7.63m焦炉的安全生产与管理[J]. 燃料与化工, 2018, 49(4): 14-16.
[6]	岳进. 焦炉部分燃烧室置换煤气加热的应用[J]. 燃料与化工, 2017, 48(1): 33-34.
[7]	杨帆. 改善7.63m焦炉横排系数的研究[J]. 燃料与化工, 2016, 47(5): 34-36.
[8]	李巨兵. 焦炉揭顶热态维修技术的应用[J]. 燃料与化工, 2016, 47(4): 27-28.
[9]	李强. 顶装焦炉机焦侧温差的合理设定及调控[J]. 燃料与化工, 2016, 47(3): 21-22.
[10]	叶小虎1 鲁彦2 秦瑾2 周向1. 关于开发薄炉墙焦炉的研讨[J]. 燃料与化工, 2015, 46(6): 23-26.
[11]	孙德财. 配煤结构对捣固焦炉推焦电流的影响[J]. 燃料与化工, 2015, 46(2): 32-33.
[12]	史瑛迪于天斌. 大容积焦炉炉柱的设计开发[J]. 燃料与化工, 2015, 46(1): 13-16.
[13]	张发刚. 降低焦炉炼焦耗热量的实践与探索[J]. 燃料与化工, 2014, 45(4): 34-36.
[14]	郭林于永惟刘素坤岳大勇张涛. 5.5m捣固焦炉煤塔结构缺陷治理与研究[J]. 燃料与化工, 2013, 44(3): 18-19.
[15]	朱郁王洪博刘保成. 机、焦侧操作台应对炉体膨胀的方案[J]. 燃料与化工, 2013, 44(2): 34-35.