耐火与石灰 ›› 2010, Vol. 35 ›› Issue (6): 15-17.

• 综述 • 上一篇    下一篇

焦宝石基可塑料的研制

张 巍,戴文勇   

  1. 派力固(大连)工业有限公司,大连 116600
  • 出版日期:2010-12-10 发布日期:2010-12-10

Development of refractory plastic based on calcined hard clay

Zhang Wei,Dai Wenyong   

  1. Plibrico(Dalian)Industries Co., Ltd., Dalian 116600, China
  • Online:2010-12-10 Published:2010-12-10

摘要:

以焦宝石、叶蜡石和黏土为原料制备了焦宝石基可塑料,对比分析了焦宝石基可塑料与铝矾土基可塑料的物理性能,结果表明:焦宝石基可塑料的物理性能略低于铝矾土基可塑料的物理性能,但是该可塑料成本较低,可部分替代铝矾土基可塑料应用于加热炉的低温段炉顶部位和烟道部位,使用效果良好。

Abstract:

The refractory plastic based on calcined hard clay is prepared with calcined hard clay, pyrophyllite and clay. The physical properties of the refractory plastic based on calcined hard clay and of the refractory plastic based on bauxite are compared and analyzed. The result shows that the physical properties of the refractory plastic based on calcined hard clay are slightly lower than those of the refractory plastic based on bauxite, but its production cost is lower. The refractory plastic based on calcined hard clay can be substituted for part of the refractory plastic based on bauxite and used at the roof area in the low temperature zone and flue area of heating furnace, with good application result.

中图分类号: