捣固焦炉高压氨水烟尘输导效果的影响因素

燃料与化工 ›› 2011, Vol. 42 ›› Issue (3): 25-27.

捣固焦炉高压氨水烟尘输导效果的影响因素

邵丰1 肖正浩1 刘洪春1 李丽华2 白金锋2

1.中冶焦耐工程技术有限公司，鞍山 114002；2.辽宁科技大学化工学院，鞍山 114051

出版日期:2011-05-28

Influencing factors of emissions transmission result with high pressure ammonia liquor for stamping coke oven

Shao Feng1 Xiao Zhenghao1 Liu Hongchun1 Li Lihua2 Bai Jinfeng2

1. ACRE Coking and Refractory Engineering Consulting Corporation, MCC, Anshan 114002, China;
2. Chemical Engineering College of Liaoning University of Science and Technology, Anshan 114051, China

Online:2011-05-28

摘要/Abstract

摘要：

论述了高压氨水在捣固焦炉生产中对烟尘输导效果的影响，根据流体力学原理，探讨了高压氨水的喷嘴结构、安装位置、直径及压力等因素对烟尘输导效果的作用及规律。根据各种影响因素提出了相应的优化策略，为进一步完善烟尘输导工艺的设计提供了理论依据。

Abstract:

The influence of high pressure ammonia liquor on the emissions transmission result in the production of stamping coke oven is disserted. According to the principle of hydromechanics, the effects and laws of the factors, such as structure, installation position, diameter, pressure etc. to the emissions transmission performance of high pressure ammonia liquor spraying nozzle are discussed. In accordance with the various kinds of influencing factors, the corresponding optimization countermeasures are put forward so as to provide the theoretic basis for perfecting further the design of emissions transmission process.

中图分类号:

TQ522.15

邵丰1 肖正浩1 刘洪春1 李丽华2 白金锋2. 捣固焦炉高压氨水烟尘输导效果的影响因素[J]. 燃料与化工, 2011, 42(3): 25-27.

Shao Feng1 Xiao Zhenghao1 Liu Hongchun1 Li Lihua2 Bai Jinfeng2. Influencing factors of emissions transmission result with high pressure ammonia liquor for stamping coke oven[J]. FUEL & CHEMICAL PROCESSES, 2011, 42(3): 25-27.

[1]	韩龙孙衍烁杨俊峰. 影响炉墙稳定性的因素分析及改善措施[J]. 燃料与化工, 2019, 50(4): 22-25.
[2]	彭宁宁侯耀华. 浅谈焦炉砌体在完全凉炉后的修复[J]. 燃料与化工, 2019, 50(2): 35-36.
[3]	彭宁宁侯耀华. 浅谈焦炉砌体在完全凉炉后的修复[J]. 燃料与化工, 2019, 50(2): 35-36.
[4]	彭宁宁. 焦炉完全凉炉后再次烘炉的特点[J]. 燃料与化工, 2019, 50(1): 21-22.
[5]	吴木之1 严铁军2. 武钢7.63m焦炉的安全生产与管理[J]. 燃料与化工, 2018, 49(4): 14-16.
[6]	岳进. 焦炉部分燃烧室置换煤气加热的应用[J]. 燃料与化工, 2017, 48(1): 33-34.
[7]	杨帆. 改善7.63m焦炉横排系数的研究[J]. 燃料与化工, 2016, 47(5): 34-36.
[8]	李巨兵. 焦炉揭顶热态维修技术的应用[J]. 燃料与化工, 2016, 47(4): 27-28.
[9]	李强. 顶装焦炉机焦侧温差的合理设定及调控[J]. 燃料与化工, 2016, 47(3): 21-22.
[10]	叶小虎1 鲁彦2 秦瑾2 周向1. 关于开发薄炉墙焦炉的研讨[J]. 燃料与化工, 2015, 46(6): 23-26.
[11]	孙德财. 配煤结构对捣固焦炉推焦电流的影响[J]. 燃料与化工, 2015, 46(2): 32-33.
[12]	史瑛迪于天斌. 大容积焦炉炉柱的设计开发[J]. 燃料与化工, 2015, 46(1): 13-16.
[13]	张发刚. 降低焦炉炼焦耗热量的实践与探索[J]. 燃料与化工, 2014, 45(4): 34-36.
[14]	郭林于永惟刘素坤岳大勇张涛. 5.5m捣固焦炉煤塔结构缺陷治理与研究[J]. 燃料与化工, 2013, 44(3): 18-19.
[15]	朱郁王洪博刘保成. 机、焦侧操作台应对炉体膨胀的方案[J]. 燃料与化工, 2013, 44(2): 34-35.