燃料与化工 ›› 2010, Vol. 41 ›› Issue (2): 6-.

• 综述与专论 • 上一篇    下一篇

固体脱硫剂的应用研究及展望

陈红萍1 ,周 坤2   

  1. 1.河北理工大学化工与生物技术学院,唐山 063009;2.河北化工医药职业技术学院,石家庄 050026
  • 出版日期:2010-03-20

Study and prospecting of solid desulfurizer application

Chen Hongping1,Zhou Kun2   

  1. 1. Chemical and Biological Technology College of Hebei Polytechnic University,  Tangshan 063009,  China;
    2. Hebei Chemical and Medical Professional Technology College,  Shijiazhuang 050026,  China
  • Online:2010-03-20

摘要:

分析总结了铁系、锌系、锰系和活性炭系等固体脱硫剂的特点与应用研究现状。氧化铁属常温脱硫剂,可单独使用或与羰基硫水解催化剂联合使用,但脱硫精度低,复合后脱硫精度提高但温度也随之提高;锌系脱硫剂脱硫温度较高,但脱硫精度可靠,在工业上广泛应用;锰系脱硫剂高温时性能优越且再生能力强,但低温时硫容小,常用于高温烟气脱硫;活性炭系脱硫剂较适于有机硫的脱除。

Abstract:

The features and present research situation of solid desulfurizers of iron, zinc, manganese and activated carbon systems etc. are analyzed and summarized. Iron oxide belongs to atmospheric temperature desulfurizer and can be used independently or used together with atmospheric temperature hydroxide radical sulfur hydrolyzed catalyst, but its desulfurization accuracy is low. After compounding, its desulfurization accuracy is improved, but the temperature is raised. The desulfurizer of zinc system has a higher desulfuriza?鄄tion temperature, but its desulfurization accuracy is reliable, it is widely used in industry. The desulfurizer of manganese system has a superior performance under high temperature and a strong regeneration capability, but it has a small sulfur capacity at lower temperature and it is normally used for smoke desulfurization under high temperature. The desulfurizer of activated carbon system is more suitable for the removal of organic sulfur.

中图分类号: