REFRACTORIES & LIME ›› 2010, Vol. 35 ›› Issue (6): 15-17.
Previous Articles Next Articles
Zhang Wei,Dai Wenyong
Online:
Published:
Abstract:
The refractory plastic based on calcined hard clay is prepared with calcined hard clay, pyrophyllite and clay. The physical properties of the refractory plastic based on calcined hard clay and of the refractory plastic based on bauxite are compared and analyzed. The result shows that the physical properties of the refractory plastic based on calcined hard clay are slightly lower than those of the refractory plastic based on bauxite, but its production cost is lower. The refractory plastic based on calcined hard clay can be substituted for part of the refractory plastic based on bauxite and used at the roof area in the low temperature zone and flue area of heating furnace, with good application result.
CLC Number:
TQ175.6
Zhang Wei Dai Wenyong . Development of refractory plastic based on calcined hard clay[J]. REFRACTORIES & LIME, 2010, 35(6): 15-17.
0 / / Recommend
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
URL: https://journal03.magtechjournal.com/Jwk3_nhysh/EN/
https://journal03.magtechjournal.com/Jwk3_nhysh/EN/Y2010/V35/I6/15
Discussion on cement clinker production with hot melting state blast furnace slag and converter slag