一种钢包上水口热更换方法的工艺探究

耐火与石灰 ›› 2020, Vol. 45 ›› Issue (5): 32-33.

一种钢包上水口热更换方法的工艺探究

翟建涛王永军吴祥

濮阳濮耐高温材料（集团）股份有限公司，濮阳457100

出版日期:2020-10-10 发布日期:2020-10-16

Technological exploration of a hot-state replacement method for ladle upper slide gate

Zhai Jiantao Wang Yongjun Wu Xiang

Puyang Refractories Group Co.,Ltd., Puyang 457100, China

Online:2020-10-10 Published:2020-10-16

摘要/Abstract

摘要： 钢包上水口是钢包上经常热更换的一种预制耐火砖。在热更换过程中，一般是通过人工使用风镐打碎进行拆除，劳动强度大，安全系数低。新研发出一种钢包上水口拉拔机构，使用该机构进行钢包上水口热更换，大大提高了工作效率。

关键词: 钢包上水口, 拉拔机构, 热更换, 探究

Abstract:

Ladle upper slide gate is a kind of precast refractory brick which is often replaced.During hot-state replacement process,the slide gate is dismantled by manual crushing with a pneumatic pick,which has the dis advantages of high labor intensity and low safety factor.Our company develops a ladle slide gate drawing mechanism for hot-state replacement,greatly improves the work efficiency.

Key words:

"> Ladle upper slide gate, Drawing mechanism, Hot-state replacement, Exploration

中图分类号:

TQ175.6

翟建涛王永军吴祥. 一种钢包上水口热更换方法的工艺探究[J]. 耐火与石灰, 2020, 45(5): 32-33.

Zhai Jiantao Wang Yongjun Wu Xiang. Technological exploration of a hot-state replacement method for ladle upper slide gate[J]. REFRACTORIES & LIME, 2020, 45(5): 32-33.