罐式煅烧炉用硅质喷补料的研制

耐火与石灰 ›› 2023, Vol. 48 ›› Issue (5): 44-45.

罐式煅烧炉用硅质喷补料的研制

（山东耐火材料集团有限公司王耐分公司，淄博　255311）

出版日期:2023-10-10 发布日期:2023-11-01

Research of silicon gunning material for pot calciner

（Shandong Refractory Co.，Ltd.，Wang Nai Branch，Zibo 255311，China）

Online:2023-10-10 Published:2023-11-01

摘要/Abstract

摘要： 选用 SiO2 含量较高的硅质原料，添加硅微粉、黏土等添加剂，试制了硅质喷补料。该种喷补料流动性好、喷补回弹率低、强度高、高温性能好。使用它对罐式煅烧炉破损的罐壁进行热态湿法喷补，效果良好，延长了罐式煅烧炉的使用寿命。

关键词: 罐式煅烧炉, 硅质喷补料, 研制

Abstract: The silica gunning material is made by silica material with high content of SiO2 and additives such as silica powder and clay. It has the following advantages，such as good fluidity， low spring-back rate，high strength and good high temperature performance. The utility model is used for hot-state wet gunning of the damaged wall of the pot calciner，which has good effect and prolongs the service life of the pot calciner.

Key words: Pot calciner, Silicon gunning material, Research

中图分类号:

TQ175.733

吴吉玉　闫　冬　李纯明　陈　晓　国　苗　张媛媛. 罐式煅烧炉用硅质喷补料的研制[J]. 耐火与石灰, 2023, 48(5): 44-45.

Wu Jiyu　Yan Dong　Li Chunming　Chen Xiao　Guo Miao　Zhang Yuanyuan. Research of silicon gunning material for pot calciner[J]. REFRACTORIES & LIME, 2023, 48(5): 44-45.

[1]	董良军）程平平）刘学智）. 焦炉凉焦台用高强度耐磨缸砖的研制与应用[J]. 耐火与石灰, 2013, 38(1): 1-2.
[2]	董良军程平平. 浇注成型、高温烧成焦炉炉门大型衬砖的研制与应用[J]. 耐火与石灰, 2012, 37(6): 1-2.