燃料与化工 ›› 2019, Vol. 50 ›› Issue (5): 31-34.

• 煤焦技术 • 上一篇    下一篇

推焦和平煤阻力的理论计算

王洪博  刘保成  王明登   

  1. 中冶焦耐(大连)工程技术有限公司, 大连116085
  • 出版日期:2019-09-23 发布日期:2019-10-18

Theoretical calculation for the resistance in pushing and leveling

Wang Hongbo  Liu Baocheng  Wang Mingdeng   

  1. ACRE Coking & Refractory Engineering Consulting Corporation,MCC,Dalian 116085,China
  • Online:2019-09-23 Published:2019-10-18

摘要:

分析了推焦电流和推焦阻力之间的关系,确定推焦最大阻力的位置。分析推焦阻力和平煤杆退回阻力的构成,分别计算不同的分力,获得的理论计算结果可指导推焦机的工艺设计和设备选型。

关键词: 推焦机, 推焦阻力, 平煤杆, 平煤阻力

Abstract:

This paper analyzes the correlation between pushing current and the pushing resistance to determine the position at the maximum pushing resistance.The mechanism of pushing resistance and leveling bar returning resistance is also analyzed to respectively calculate component forces.The theoretical calculations can be used as guidance for process design and equipment selection for the pusher machine.

Key words:

中图分类号: