燃料与化工 ›› 2022, Vol. 53 ›› Issue (3): 26-28.

• 煤焦技术 • 上一篇    下一篇

基于Autodesk Inventor的干熄焦一次除尘器衬砖设计

秦瑾   

  1. 北京首钢国际工程技术有限公司, 北京100043
  • 出版日期:2022-05-23 发布日期:2022-05-19

Design for lining brick of CDQ primary deduster based on Autodesk Inventor

Qin Jin   

  1. Beijing Shougang International Engineering Technology Co.,Ltd.,Beijing 100043,China
  • Online:2022-05-23 Published:2022-05-19

摘要:

打破了传统三维装配模式,应用Autodesk Inventor 软件自上而下的设计理念,以干熄焦一次除尘器衬砖设计为例,详细说明了先整体后局部最后到细节的参数化驱动关联设计。此设计思路提高了设计精准度,缩短了设计周期,利于砖量统计及后续优化设计,且对其他工业窑炉及其衬砖的设计有很好的借鉴作用。

关键词: 干熄焦, 一次除尘器衬砖, Autodesk Inventor软件 ,

Abstract:

This paper unleashes conventional 3D assembly mode,i.e.it adopts the top\|down design concept of Autodesk Inventor software,takes the design for lining brick of CDQ primary deduster as an example,explicates the parametric correlation design that starts from overall to local till every details.This concept will produce higher design accuracy in a shorter design period,in favor of brick quantity statistics and future design optimization,which will provide a reference for design of other industrial furnaces and their lining bricks.

Key words: CDQ (Coke Dry Quenching), Lining brick of primary deduster, Autodesk Inventor software

中图分类号: